The first thing you would think of doing is calling in a plumber for a sink replacement job. But this is not really necessary. You can do some of the work around the house yourself if you know the process. Find out some tips on how to change your sink faucet at home in this article.
Do some measuring and examination work beforehand
. When you find that your sink faucet is no longer working properly and you decide to change it, the first thing you need to do is to go through a check. This step is crucial, as it allows you to get a feel for the normal state of the situation. The first thing to do is to take measurements. To change your sink tap, you need to make sure you have the right information to pay for a new one. To buy a mixer tap, you should first measure the centre distance of the tap. This will tell you the diameter, the distance between the two fixing holes. If you do this, you can be sure you are buying a suitable tap. For more information, you can visit their website to find out more. Then the second step will be to carry out an examination of the pipework. It is important that you check the condition of the pipework before moving on to replace the tap. You should pay attention to the supply and connection pipes. To do this, you can unscrew the pipes to ensure that the sealing washers are in good shape.
The actual replacement of the tap
To replace the sink tap, you must first turn off the water supply. It is imperative that you turn off the water supply in order to work better. Next, you will have to remove the old defective tap. At this stage, you must unscrew the nuts to separate the supply pipe from the tap. Finally, you can replace the new tap you have purchased by placing it exactly where the old one was removed. Be careful not to lose or damage anything.